| |
|
 |
|
|
|
|
Gutter Stuff® Photo Gallery |
|
|
|
| | | |
 |
|
GutterStuff’s porous texture allows an enormous amount of water to flow through, while blocking out debris. The foam is a rugged, exterior grade polyether.
GutterStuff’s inherent properties prevent fungus, mold, or mildew from forming.
|
| | | | | |
 |
|
A demonstration piece can be made by installing a small section of the foam into a 5” K style gutter that has end caps and a downspout hole.
To ensure a tight seal in the display unit the length of the foam should be about ¾ inch longer than the display unit and can be trimmed with a pair of scissors or razor.
Demonstrate GutterStuff by running water from a hose or kitchen sink to view the amount of water that flows through the GutterStuff product.
|
| | | | | |
 |
|
GutterStuff installs snugly under the gutter spikes without interfering with the roof and is invisible from ground level. |
| | | |
|
| | | |
 |
| |
| All Photos copyright © 2004-2007 RAS Web Design |
|
|Home|
|Our Product|
|Gallery|
|FAQ|
|Product Comparisons|
|My Story|
|Dealers & Installers|
|Contact Us|
|
|
